Shervey Lithium Battery 12v 300ah

Description

Designed and built in Bundaberg, the Shervey Lithium Batteries are designed and built in Australia for Australians.  Specifically designed for deep cycle applications, they are equipped with an internal Battery Management System (BMS) that monitors and optimises each prismatic cell during operation. This BMS ensures the battery pack is protected from overcharge, over discharge, temperature fluctuations, and short circuits.

Note: It’s essential to ensure that Shervey batteries are not installed in vehicle engine bays, high heat environments, wet areas like caravan chassis mounts, open ute trays, boat deck areas, or compartments dedicated to carrying gas.

Features

• Continuous Discharge Rate: 250a
• Continuous Recharge Rate: 250a
• Short Circuit Protection
• Temperature Protection
• Overcurrent Protection
• Parallel Compatibility (No series connection

Specifications

• Overcurrent Disconnect Minimum Value: 270A (Reconnect after 30 seconds)
• Battery HV Disconnect: 15V (Reconnect at 14.4V)
• Battery LV Disconnect: 8.8V (Reconnect at 10.4V)
• Discharge High Temp Disconnect: 65°c (Reconnect at 55°c)
• Discharge Low Temp Disconnect: -20°c (Reconnect at -10°c)
• Recharge High Temp Disconnect: 65°c (Reconnect at 55°c)
• Recharge Low Temp Disconnect: 0°c (Reconnect at 5°c)
• Active Balancer Start Voltage: 3.3V
• Battery Weight: 29.13 kg
• Battery Dimensions: 454.5mm x 205mm x 294.9mm